Tradux pipe or cable entry for ponds
Tradux pipe or cable entry for ponds
Tradux pipe or cable entry for ponds
Tradux pipe or cable entry for ponds
Tradux pipe or cable entry for ponds

Tradux pipe or cable entry for ponds

Product code: 57154
44.46
Hides pipe or cables entering or leaving your water feature.
Hoses or cables running over the edge of a pond can spoil the ponds appearance.Hide your pond connections to create a professional finish. This Oase Tradux fitting provides truly wonderful finishing touch to provide below the waterline watertight transition for cables or hose pipe.

The Tradux set makes an underwater exit for your pump's electrical cable or hose easy .Tradux kit can be used on all pond liner, any preformed plastic or fibreglass ponds or any material up to 12mm in thickness.

The screw couplings allow the Tradux connector to be easily fitted and produce a secure waterproof and clean seal. The rubber gasket ensures a watertight seal.

no pipes shown in pond with tradux fitting by oase

Technical specification
For use with the following hose sizes: 12.5, 20, 25, 32, 38mm (2", 1 1/2", 1 1/4", 1", 3/4" inch)
For use with cables sizes: 3mm to 9 mm diameter
Diameter: 115 mm
Maximum length (when using 3/4" hose on both sides): 335 mm
Materials: Plastic body, EPDM rubber seal and bung, Stainless steel bolts
Maximum transition thickness opening for cable use: 30 mm
Maximum transition thickness opening for pipe use: 10 mm

Below we show how to install a Tradux fitting for liner or reservoir transition.
tradux installation for hose
Below we show how to install a Tradux fitting for cable. Note one Tradux fitting is required per cable. 

TRADUX FOR CABLE INSTALLATION
 
Brand Oase
Code 57154
Weight 1kg